Cubo 15

rasto wrote: Hi all! I have a 15" driver Lomo Kinap 2A-20. Will it work in Cubo15, normal or extended version?

Still looking for an answer for my question. Im about to order bin material to build Cubo15, but is it a good choice? Which choice would be better?

rasto mr cubo has been unwell the last few weeks, but im sure when he is feeling better he will answer your question. smiley33

rasto wrote:

rasto wrote: Hi all! I have a 15" driver Lomo Kinap 2A-20. Will it work in Cubo15, normal or extended version?

Still looking for an answer for my question. Im about to order bin material to build Cubo15, but is it a good choice? Which choice would be better?

The extended version is just a little bit more wood. I'd just order your wood for the regular and start cutting. You're going to have to buy a little more wood anyways if you go with the extended; now or later, and the reg. version "extra" piece you wind up with can be used as internal reinforcement. The six sides, supports and two internal (constant) pieces will give you a bit of work now. Just save gluing the top panel on until the end since that's all you need to keep off in order to make either one. You'll be screwing the "extended" piece from the top anyways and the regular piece will screw onto the top panel itself, so either way is a win. smiley20

A drill will fit quite nicely into a cubo.

Just a friendly suggestion for you if you're really itchin' to get this project going in the worst way. Happy fabbing!

Get well soon Cubo!

Thank you for your reply. I´ll just be patient then smiley20
Get well soon Cubo!

I ate about half an apple today, low energy, will keep it brief for now:

Rasto: Cubo Extended
Arnold: Not really, raise budget?
Jefferson: No sines, etc, normal music content will work. Keep it gentle. 101 dB/W/m, Will do 180 Hz but doubt it will sound well above 125 Hz.

Best regards

Cubo

so what you recommend that is cheap and works well,

arnold remember, cheap and works well dont go together, whats your budget for drivers. How many do you want to build.......

my budget is $200, might just have to build 2

so you looking at 100 per driver.......

Arnold Eminence Kappa 15LF's work really well in the extended Cubo. You can also use the Kappa Pro 15LF's the later I believe is 500watts and the American Standard kappa is 600watts.

I've also used Delta Pro 18's in the Cubo 18. So I am sure the Delta pro 15 will do as well. smiley20