MTH-30

Okay, thank you!

Also my bad, I had just seen the plans on the hosted plans section and had not yet opened the Full Size Plan in de attachment.

Is there anything similar but for a 15"?

jim west wrote: Is there anything similar but for a 15"?

Google 15" tapped horn

the martinsson tham15... www.diyaudio.com/forums/subwoofe ... -horn.html
almost same dims as mth30 but 150mm wider.
i actually have one which was built for testing available for not much cash

cudds, do you / have you used these cabs together? if so, were there any issues?

i have a/b tested them although the tham15 was loaded with a driver that does not perform as well as the specified b&c 15tbx100. there wasnt much in it but can believe that with the b&c driver the tham15 would wipe the floor with the mth. i dont think there is anything to be gained in using them together as the tham15 will play just as high as the mth.



black- mth30 pd12sb30
grey- tham15 b&c15tbx100

on a bang for buck ratio i think the mth would win every time, but the tham15 is only a little bigger, can handle 3 times as much power and plays lower (but will also be 3times more expensive!!)

Some plots of other drivers that could work. Mind your power tho, i have blown one of my goldwoods before smiley18
[attachment=0:2otorbmi]<!-- ia0 -->jblandgoldwood.jpg<!-- ia0 -->[/attachment:2otorbmi]

Grey- Goldwood GW12090
Black- JBL 2206H

Has anyone testet real life this enclosure, MTH 30, compared to an 18" BR speaker ?
If anybody did that, say what was the difference between them ... I know that from the simulation , the MTH is way more louder, higher SPL. I;m interested if this is exactly the result in real life...
The same with Cubo 12 against an 18" in BR, but in real life compared.
Thanx a lot ! ! I;m waiting for your replys

I use four. Great cabs

4 cabs MTH 30 with what loudspeaker ? Pd 12DB30 ?
Have u compared 1 by 1 with an 18" BR speaker ? If u did, with what 18" woofer ?
thanx