Eminence 18 Scoop

levyte357
Topic Author
Offline
Platinum Member

13 years 7 months ago #12647 by levyte357

Replied by levyte357 on topic Eminence 18 Scoop

nickyburnell wrote: OK sorry to be on high horse, just love the whole open source cubo/staip/marc o approach.

This place was started because......

So please confirm, it's emmi, 610 wide, two 45 deg slopes in the rear @ 180mm.

Please confirm the gap from bottom of rear baffle to bit below if this is to be different.

Really, strongly, suggest 636W, then gap of 114mm should be good.

610W would mean gap of 127mm (Saul 5" gap) :lol:

\"When in Vegas, do as the vegasians do\".

Please Log in or Create an account to join the conversation.

nickyburnell
Offline
Platinum Member

13 years 7 months ago #12650 by nickyburnell

Replied by nickyburnell on topic Eminence 18 Scoop

OK 636.

MDF time soon (cough, splutter)

Please Log in or Create an account to join the conversation.

bitzo
Offline
Platinum Member

13 years 7 months ago #12652 by bitzo

Replied by bitzo on topic Eminence 18 Scoop

cross braced on the mouth?

Please Log in or Create an account to join the conversation.

saul
Offline
Platinum Member

13 years 7 months ago #12653 by saul

Replied by saul on topic Eminence 18 Scoop

naturally

put a horizontal brace going further back towards the scoop too i.e. like on Tony's boxes

Please Log in or Create an account to join the conversation.

levyte357
Topic Author
Offline
Platinum Member

13 years 7 months ago #12654 by levyte357

Replied by levyte357 on topic Eminence 18 Scoop

bitzo wrote: cross braced on the mouth?

Personally think doubled horizontal brace, is fine.

\"When in Vegas, do as the vegasians do\".

Please Log in or Create an account to join the conversation.

nickyburnell
Offline
Platinum Member

13 years 7 months ago #12655 by nickyburnell

Replied by nickyburnell on topic Eminence 18 Scoop

This will be done horizontal probably, but I agree cross much nicer.

Please Log in or Create an account to join the conversation.

levyte357
Topic Author
Offline
Platinum Member

13 years 7 months ago #12656 by levyte357

Replied by levyte357 on topic Eminence 18 Scoop

Gonna start a whole new fight here, and say if you double the front baffle, and make chamber depth approx 210mm, good chance it will be compatible with both PD1850, and PD1851.

Yes, I have heard PD1851 in small chamber scoop before.. smiley2

ASS RX1851DC vs ASS S11851

\"When in Vegas, do as the vegasians do\".

Please Log in or Create an account to join the conversation.

nickyburnell
Offline
Platinum Member

13 years 7 months ago #12660 by nickyburnell

Replied by nickyburnell on topic Eminence 18 Scoop

Please Log in or Create an account to join the conversation.

levyte357
Topic Author
Offline
Platinum Member

13 years 7 months ago #12662 by levyte357

Replied by levyte357 on topic Eminence 18 Scoop

nickyburnell wrote:

:lol:

Dont worry Nick, previous dims will work great...

Added suggestion is for those of us who are a little more...

:lol:

\"When in Vegas, do as the vegasians do\".

Please Log in or Create an account to join the conversation.

mykey-
Offline
Platinum Member

13 years 7 months ago #12665 by mykey-

Replied by mykey- on topic Eminence 18 Scoop

there are some wankers here that dress like that :lol:

Please Log in or Create an account to join the conversation.

Time to create page: 0.369 seconds