file Cubo Kick 12

2 weeks 3 days ago #24854 by Cubo15
Replied by Cubo15 on topic Cubo Kick 12
Read this topic for more recent replies and related information: freespeakerplans.com/kunena/38-hosted-pl...50-cubo-kick?start=0

I think 4 Cubo Kick would be complete overkill, so I would use 2 Cubo Kicks, either use the 12" (moderate overkill) or 15" (normal overkill) version. As you won't need much power and probably will go for a left - right placement, I would go for medium Qts drivers (around 0.3)

For best integration I would use a sound processor and stuff the rear chamber with a good bit of dampening material.

Best regards Cubo

I have a question about the Cubo Kick 12 - 15. The parts are mostly used in the PA sector, would they also work well in a medium sized home cinema...e.g. 2 or 4 pcs. The frequency response of 80 - 200 would fit perfectly as the subwoofers go up to about 100.
The following user(s) said Thank You: Silent

Please Log in or Create an account to join the conversation.

2 weeks 3 days ago #24855 by Silent
Replied by Silent on topic Cubo Kick 12
Hello Cubo
Thank you for your quick response and professional assessment....Perfekt!

Then 2 pcs. 15 Cubo should be enough to play a little deeper according to the measurements, as a driver I like to take the recommended 18Sound 15ND930 or possibly one from the Faital Pro series because they are a little cheaper.
The placement is L and R behind the screen with about 3.0 m. Distance to each other and in 1,20 m. Height. As a subwoofer I'm building 2 St www.avsforum.com/threads/the-devastator-...age-13#post-59163736 which go so to about 90, and then the Mains and the Cubo Übernehmen should. I hope that everything works as I imagine...we will see and I will report.
The sups and kickers will be driven by the LFE signal from the AV preamp and then processed in a Xilica XP to match.
Your construction plans on the first page are very well executed, I always build with 21 multiplex panels and will gladly carry out your tip with the insulation of the rear chamber.

Many greetings Peter.

Please Log in or Create an account to join the conversation.

1 week 2 days ago #24859 by Cubo15
Replied by Cubo15 on topic Cubo Kick 12
I think some German made it through Google translate ;)

Part of why the 15ND930 is relatively expensive is the neodymium motor, you could opt for the closest ferrite version, be it 18Sound or Faital Pro. Considering you have all the EQ you need, a low Qts driver will work just as well.

If you want to cross lower then 80 Hz, you can close one or multiple ports of Cubo Kick. The bracing separates the port into 4 equal parts, for every part that you close, the tuning lowers 10 Hz. That way you can tune Cubo Kick 15 to 50 Hz, 60 Hz, 70 Hz or 80 Hz.

If you ever have a picture of the setup, I'd be interested.

Please Log in or Create an account to join the conversation.

6 days 21 hours ago #24861 by Silent
Replied by Silent on topic Cubo Kick 12
Hello Cube 15
I am always grateful for the possibility of a Google translation.

If I measure the whole system later then it may well be helpful to change the tuning with the ports....Home theater often has different requirements as PA. I have now ordered 2 15ND930, the Faital are poorly deliverable.

Do you mean my setup behind the cinema screen..the 2 subwoofers and the 2 Cubos?
Is this actually the final construction plan .. www.freespeakerplans.com/plans/14-plans/basscab/54-cubo-kick

Many greetings Peter

Please Log in or Create an account to join the conversation.

5 days 8 hours ago #24863 by Cubo15
Replied by Cubo15 on topic Cubo Kick 12

Do you mean my setup behind the cinema screen..the 2 subwoofers and the 2 Cubos?

I do not think this sentence translates well, can you post the original German one (I might actually be able to understand it better ;)

All plans on this site are the final ones.

Cubo

Please Log in or Create an account to join the conversation.

Powered by Kunena Forum