cubo 12

More
13 years 2 months ago #15279 by Cubo15
Replied by Cubo15 on topic cubo 12

Wannabass wrote: hi everybody,
I noticed that in some of the bigger cubo's (but not the 12), the designer offers a choice of mounting the driver with magnet inside the mouth or in the chamber.

Do you think "magnet in mouth driver mounting" in my Cubo 12 is worth trying? would make it play lower ? (I haven't check the dimensions yet to see if the driver would fit smiley36 )


www.freespeakerplans.com/index.php?optio...c.php&p=11048#p11048

Part of the Cubo-design philosophy is that you can place the driver in two ways. With the magnet in the horn for the deepest bass, with the magnet in the chamber for most output. Currently only the Cubo Sub 215 doesn't have this option.

Best regards

Cubo

Please Log in or Create an account to join the conversation.

More
13 years 2 months ago #15286 by Wannabass
Replied by Wannabass on topic cubo 12
:oops: .....I could have searched the forum a little harder before asking !


smiley1 thank you for confirming this option, I'll give it a try !

Please Log in or Create an account to join the conversation.

More
13 years 2 months ago - 13 years 1 month ago #15439 by tda-audio
Replied by tda-audio on topic cubo 12
Very simple,effective and ergonomic design . Many different drivers well work.



and 10 " version (faital w10n8-700 vc-4" p-700w)





thanks CUBO !!!
Last edit: 13 years 1 month ago by tda-audio.

Please Log in or Create an account to join the conversation.

More
13 years 2 months ago #15441 by bee
Replied by bee on topic cubo 12
welcome tda, good to see you hear...... as allways nice build.......

Please Log in or Create an account to join the conversation.

More
13 years 2 months ago #15445 by Tony Wilkes
Replied by Tony Wilkes on topic cubo 12
tda_audio,

I hope that Cubo gets a few shekels from every sale?

Tony

Please Log in or Create an account to join the conversation.

More
13 years 1 month ago #15501 by Pirlo
Replied by Pirlo on topic cubo 12
So, read all of the 11 pages (+ the other threads as well) and still wondering if there is a driver that I should prefer!?
I know that this design works with a varous of drivers that match the given specs, I know that there is a FAD, but is there a driver that is absolutly dedicated if money plays not (or better "less") a role?!?

I´m building a low-end-mod-version at the moment, use an unknown fostex-driver that is lying around in the workshop first, but I know already that must be updated in the near future... :lol:

Please Log in or Create an account to join the conversation.

More
13 years 1 month ago #15510 by Pirlo
Replied by Pirlo on topic cubo 12
No one!?

Okay, think I will give the 3012LF a try then sometime in the future, the fostex works for homeuse well enough (say this now, we'll see what's in a couple of weeks happen smiley17 )

Please Log in or Create an account to join the conversation.

More
13 years 1 month ago #15514 by Cubo15
Replied by Cubo15 on topic cubo 12
Haven't seen shekels yet (nor has the drawning artist who I secretly decided should get a few shekels from those shekels in such a case) but copy catting is the second highest honour a diy-design can get.


If money doesn't play a role, 4" VC (or larger), Low Qts (0.25 <), neo-drivers are the mind set. Personally I was charmed by the B&C 12NW100 and the Beyma 12P1000nd. Beware the 12SW1300nd and 18Sound 12NLW9300 are also out there.

Then again it doesn't have to be neo magnets persé but the equivalent ferrite magnet would leave less effective cabinet volume ;)

Best regards

Cubo

Please Log in or Create an account to join the conversation.

More
13 years 1 month ago #15517 by Pirlo
Replied by Pirlo on topic cubo 12
Thanks for the info!

Will have a look in detail later, first work the plans out and do a propper test-session as promised - ya'll have it in ya mail-acc. in the middle of the week...

Please Log in or Create an account to join the conversation.

More
13 years 1 month ago #15531 by tda-audio
Replied by tda-audio on topic cubo 12

Beware the 12SW1300nd and 18Sound 12NLW9300 are also out there.



why?

12sw1300 -wery good work.......

CUBOturic 10" (faital 700w) - incredible pressure in these their own size...

Haven't seen shekels yet


later , I recently came to do still CUBOturic....

Please Log in or Create an account to join the conversation.

Time to create page: 0.660 seconds
Powered by Kunena Forum