6\" horn build

Thanks tony.

very nice, loving the 'SKIN' colour


mouth looks big, if your using them above the 12's why such a big horn?

the mouth area is not much differant in size to other 6" flares it could be the camera angle. the colour is a base coat (undercoat), They will be sprayedin blue once ive finished them. Size wise they fit nicely in the gap above the 12" on the mt121's. I am looking at hanging the 1" from within the 12"

not sure about the plots i think i may be doingsomethingwrong any ideas!!!!
red line = speech
pink line = pink noise
purple line = white noise

Reference signal and mic signal the right way round?
Nice work by the way.
JaKe

Great work

What's the basic method for fibreglassing like that?

Its the first time for me. Once i made the mold i gave it one lining of fiberglass then started moulding the shape with fiberglass once i got the shape i wanted, i gave it two more layers of fiberglass. Then a lot of sanding and filling out the bumps and holes etc. Once i was happy with the basic mold it was sprayed with the undercoat. more sanding and the odd bit of filling then another coat of undercoat. For me its been a bit of try and see! and a learning curve.

All i can say is have a go take your time, and be very patient but never rush the job in hand.

Very good work bee [img]smileys/smiley32.gif[/img]

Very nice indeed.

Are you planning on making a phase plug for it.

super-here i may have a go!!! another first for me! i willhave to read up on them, i know there is alot of info on making them.