file Cubo Kick

1 year 11 months ago - 1 year 11 months ago #24328 by giveortake
Cubo Kick was created by giveortake
Use this thread to discuss the Cubo Kick design posted  here

What is your philosophy of life or your creed ?
\"Have a good time, ALL THE TIME\"

Wisdom is better than silver and gold !

Please Log in or Create an account to join the conversation.

1 year 6 months ago #24368 by redtag
Replied by redtag on topic Cubo Kick
Ok :p I have 2 Cubo 15 extended loaded with kappa LF-2 and 2 cerwin-vega Prostax PS-12.. I want to upgrade this system with more kick. What should work great? Cubo 12 kick? Or anything else? And what driver? And crossover frequencies?

Please Log in or Create an account to join the conversation.

3 months 3 weeks ago #24629 by Beari
Replied by Beari on topic Cubo Kick
Hi i whant to bulid 6 cubo 15 kicks i already have 6 cyclops loaded with oberton 18xb1600 would i be able to load the cubo with oberton 15xb700 ? Thanks

Please Log in or Create an account to join the conversation.

3 months 2 days ago #24644 by skyhighhifi
Replied by skyhighhifi on topic Cubo Kick
Has anyone tried using a Cubo kick down to 40 Hz? Is for a 12v system so looking for something as small and lightweight as possible.

Would I be better off making a Cubo 15?

Please Log in or Create an account to join the conversation.

2 months 3 weeks ago #24646 by Cubo15
Replied by Cubo15 on topic Cubo Kick
@Beari: It's not a typical kick driver, more a typical bass driver although it would work.

@Skyhighhifi: Cubo Kick 15 has 4 ports, for every port that you close you'll lower the tuning approximately 10 Hz but also lower output below 100 Hz. More than 50% of Cubo Kick is aimed at output between 100 and 200 Hz, so if you don't cross that high, a lot of wasted space. Cubo 15 sounds best crossed around 100 Hz but also has much more output below 100 Hz. I've seen both cabinets used for 12V PA but they will have quite distinct sounds and place different demands on the tops used above them.

Please Log in or Create an account to join the conversation.

Powered by Kunena Forum