lightbulb CUBO10

8 years 3 weeks ago #18692 by Fechete_Ionut
CUBO10 was created by Fechete_Ionut
Does anyone have the plans for CUBO10 ? I want to builtan mid-top and for the low part i want to use 2 x Cubo10 mouth to mouth crossed somewhere at 150-200hz and from there a mid andhigh should do the job. Maybe the cross point will be higher, i don;t know untill i will built one.
Mr. Cubo or somebody can u help please ?

Please Log in or Create an account to join the conversation.

8 years 3 weeks ago #18694 by bee
Replied by bee on topic Re: CUBO10
you really need a high bass cab for that job... (kick cab) the cubo 15 and 18 don't play that high, i think this is due to the design.... i now cubo is working on a kick cab at mo, maybe a 10" version of this would be better...... or scale down a usb, hd15.... to suit a 10" driver.... you would need to draw it out to scale basically divide each measurement by 15 or 18 and times by 10.... this will need a few tweaks hear and there but wont be far out...

Please Log in or Create an account to join the conversation.

8 years 3 weeks ago #18696 by Fechete_Ionut
Replied by Fechete_Ionut on topic Re: CUBO10
I know how CUBO12 sounds above 90-100hz because i have 4 bins CUBO12 loaded with RADIAN L12-8481, that;s why i thought at CUBO10. Cross it at about 100-120-150-200hz, depends where it sounds the best, and from there, an 6,5" or 8" mid + driver should do the job.
I've scaled CUBO12 in Autocad and it;s ok. 2 x CUBO12 sticked together and with a midrange and high above it;s verry big and heavy and quite impossibile to put it on a tripod... that;s why i want 2x SMTH on 10", horn loaded, high SPL but small dimensions. Don;t need to get verry low, but still having an F3 at about 80hz aprox, if it;s possibile.

Please Log in or Create an account to join the conversation.

8 years 3 weeks ago - 8 years 3 weeks ago #18699 by Cubo15
Replied by Cubo15 on topic Re: CUBO10
The distinctive Cubo sound above 100 - 120 Hz has more to do with the cabinet then with the driver, thus changing for a 10" might gain 10 - 20 Hz but that's about it. A hybrid (as in Cubo horn topology) kick section is possible but would need a rigurous redesign and lot's of measurements likely.

Safer bet is to wait for one of my 5 horses, or to get an exsisting kick section (for example the one Bee suggests).

Best regards

Cubo
edit - Cubo 10 is a Cubo 12 with a suitable 10".
The following user(s) said Thank You: Fechete_Ionut

Please Log in or Create an account to join the conversation.

8 years 3 weeks ago #18700 by Fechete_Ionut
Replied by Fechete_Ionut on topic Re: CUBO10
I want it to be smaller than Cubo12..... So that i can put it on tripot, one Cubo210... with a mid and high above it.

Please Log in or Create an account to join the conversation.

8 years 3 weeks ago #18701 by Cubo15
Replied by Cubo15 on topic Re: CUBO10
My kicks are at least the size of Cubo 12 but one kick will go with two Cubo's.

Best regards

Cubo

Please Log in or Create an account to join the conversation.

8 years 3 weeks ago #18703 by Fechete_Ionut
Replied by Fechete_Ionut on topic Re: CUBO10
ok, but can i scale Cubo12 ? will it sound rubish ? I need the CUBO210 to be smaller than CUBO212.. I tried to put it on tripot, one CUBO212 butit's verry big and heavy as well..

Please Log in or Create an account to join the conversation.

8 years 3 weeks ago #18710 by Cubo15
Replied by Cubo15 on topic Re: CUBO10
I doubt a scaled Cubo 10 will be of more use above 150 - 160 Hz than a HD10 would be.

Best regards

Cubo

Please Log in or Create an account to join the conversation.

7 years 10 months ago #18929 by tda-audio
Replied by tda-audio on topic Re: CUBO10
cubo 10





Please Log in or Create an account to join the conversation.

7 years 4 weeks ago #20240 by sinter_claes
Replied by sinter_claes on topic Re: CUBO10
how do's the cubo12 preforms white the beyma12sw1300? I want to make one.I only do not know a driver to chose
greets

Please Log in or Create an account to join the conversation.

Powered by Kunena Forum