B&C 8 PE 21
- chaudio
- Offline
- Platinum Member
Less
More
16 years 1 month ago #4807
by chaudio
Replied by chaudio on topic B&C 8 PE 21
All I know is that from trying the 8PE21 and the 8M400 is the same cab (direct radiating midrange 400Hz-3kHz), the 8M400 does seem to be louder by a dB or so and possibly smoother.
What were you using for the simulation?
What were you using for the simulation?
Please Log in or Create an account to join the conversation.
- deadbeat
- Offline
- Platinum Member
16 years 1 month ago #4820
by deadbeat
Beranek\'s law
\'bits of ply round a driver\'
Replied by deadbeat on topic B&C 8 PE 21
Always check the asylum. Is this you, JS?
db.audioasylum.com/cgi/m.mpl?for ... ht=freddyi Edited by: Deadbeat
db.audioasylum.com/cgi/m.mpl?for ... ht=freddyi Edited by: Deadbeat
Beranek\'s law
\'bits of ply round a driver\'
Please Log in or Create an account to join the conversation.
- wrighty
- Offline
- Junior Member
Less
More
- Posts: 39
- Thank you received: 0
16 years 1 month ago #4821
by wrighty
Replied by wrighty on topic B&C 8 PE 21
Chris: Hornresp, but using the directivity plot, 0 degrees off axis, instead of using at the default constant directivity plot. I did some real world plots a while back with the 8PE21 and horn and they showed similar characteristics to the Hornresp predictions, so I'm inclined to believe it to some degree, although the only real way would be to try both.
Please Log in or Create an account to join the conversation.
Time to create page: 0.576 seconds