MT2420

So the Cabinet concept was to take the trapezoid sides off to give it more of a stylish see through effect.
The plan calls for flying hardware so the side support isn't that important.

The horn is a 2"compression from 600 or 800 up
The 12 will do 200 to 6 or 800
there will be two cabinets on each side " inverted" so the drivers will couple.

below will be HD 15's for low and 18's for subs

The horn guide is a cross between a JBL 2355 and 2380 and has a custom made 2328 conversion throat

Nice! Let's hope they sound as good as they look.

Do you have experience crossing the HD15's at 200 Hz? Most people tend to cross them at 160 - 180 Hz. If you use 2 of those tops per side, they probably wouldn't mind meeting the HD's over there.

sorry for the late response.


Good point on the HD15s. I'm taking the cabinet to my "drive rack" guy tomorrow !! yeah.
Going to see what the really do before committing to the other 3 cabinets. I am way excited though.

there was some EQ ing during the recording and he kept the upper high end backed off