Submitting a modified plan

I am half done with a MT130 and have made modifications.

Most are cosmetic and the horn is changed a bit more. What is the process for submitting "my" design or "suggested Modification" to the original designers plan ?

The attached sketch is a rough prelim design and I will be making wood horns for jbl 2445s

the pic is about where I'm at. The main "cosmetics" is that I have removed the side panels for the see through effect.

Hello tkroeker,
Thank you for asking, this site is all about its members and how we can help the community. We highly welcome plans submissions, you can reach out to us directly at admin@freespeakerplans.com and we will help you from there.
Thank you for your interest in FSP !!!

Thanks, will do.

update. Keep in mind this is the prototype so I have not been to precise on things like nail aim LOLOL :woohoo:

So the Cabinet concept was to take the trapezoid sides off to give it more of a stylish see through effect.
The plan calls for flying hardware so the side support isn't that important.

The horn is a 2"compression from 600 or 800 up
The 12 will do 200 to 6 or 800
there will be two cabinets on each side " inverted" so the drivers will couple.

below will be HD 15's for low and 18's for subs

The horn guide is a cross between a JBL 2355 and 2380 and has a custom made 2328 conversion throat