Frequency: 50 to 200Hz

Enclosure Type: Horn

Size: 700x500x810mm

Recommended Driver: pw332(12.00sw)

Plan:    Punisher-MK2

 

 

alt

 

 

 

 

 

 

 

 

 

 

 

 

 

 

alt

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

alt

Settings: 2x Punisher/1x X-tro

Processor settings All filters 24db/oct Linkwitz/Riley s

Sub  hp: 40,5 hz (For a single cabinet a side 45Hz can be used) lp: 91,0 hz

low  hp: 99,2 hz  lp: 297 hz

mid  hp: 315 hz  lp: 2,38 khz

high  hp: 2,45 khz

Delay

sub  0

low  5,99 ft  1,82 mtr  5,31 msec

mid  6,81 ft  2,07 mtr  6,04 msec

high  7,21 ft  2,19 mtr  6,40 msec

EQ:

sub1 40-50Hz (depending on number of cabinets) gain: personal taste Q = 3-4

low  105 hz  -1,0 db  Q = 4,410

mid  2,25 khz  + 4,0 db  Q = 1,215

high  14,3 khz  +1,0 db  Q = 1,789

Website: http://www.speakerstore.nl/index.php?l=en&pg=11&c=21

Designers: Walt and  Frederik from www.speakerstore.nl

Log in to comment

inting replied the topic:
9 years 4 months ago
i hope..i build this one..
Lime replied the topic:
9 years 7 months ago
i'm not authorized for download..
is there anything to do?
giveortake replied the topic:
9 years 7 months ago
I have now edited the first post. It redirects to the correct page:
freespeakerplans.com/plans/14-plans/basscab/45-punisher-mk2

Let me know if you encounter any issue.

:)
arneblommaert replied the topic:
9 years 7 months ago
Plan is not available for download..
N.Dougal21 replied the topic:
10 years 7 months ago
can anyone tell me how many sheets per cab these take to build?
MAutopsy replied the topic:
14 years 8 months ago
Thanks bitzo- I gave myself a crash course in HornResp last night. Good stuff i have a much better understanding of it now.
bitzo replied the topic:
14 years 8 months ago
cms rms mmd can be calculated by HR, double click on each field, HR ask mms vas and fs to get this value.

However this sim is not so accurate. Divide the horn in 5 section.

cheers, bitzo
MAutopsy replied the topic:
14 years 9 months ago
Need some help, trying to figure out HR (V 26.20) and i am getting this error.
Got the Cab inputs from a speakerplans forum bitzo pointed me to and my driver specs are as follows:
Radian 2312
Resonant Frequency (Fs) 56 Hz
Impedance (Re) 5.3 ohms
Total Q (Qts) .214
Mechanical Q (Qms) 1.94
Electrical Factor(Qes) .241
Comp. Equivelant Vol. (Vas) 46.64 Liters / 1.65 cu. ft.
Voice Coil Overhang (Xmax) 3.66
BL Factor 23.1 T-M
Reference Efficiency (%) 3.3%
Surface Area of Cone (Sd)m2 .053 m2- 530 cm^2

I know that this probably wont come out right, as this isnt the right driver. I just would like to know what the error is and how i get the value.
giveortake replied the topic:
14 years 10 months ago
Fixing the links now...

[attachment=1:22mv232n]<!-- ia1 -->060_P-II.zip<!-- ia1 -->[/attachment:22mv232n]
[attachment=0:22mv232n]<!-- ia0 -->060_Plans.zip<!-- ia0 -->[/attachment:22mv232n]
bee replied the topic:
14 years 10 months ago
hope these help....












replied the topic:
14 years 10 months ago
im lookin for plan to build the punisher......the cad files arent ther nemore.....it will b much appreciated if sum1 send me a link to the plans

thankz kevin