Martin Audio Dilema

Ok, i bought a Second Pair of Ladyshaves.
They where loaded with in correct drivers.
Been looking At my Options which are:

1.Get a Pair of ATCs reconed with correct Cone.

2.I also ave a pair of H350's that have 4 good RCF's in them, so i could use RCF in my 4 ladyshaves, and put ATCs in the H350. This is the Cheapest option as i have a Shelf full of working ATC's. But the Tuning on the H350 will probably be wrong, even though if i keep RCF in them, i will have to put 2 ATC's in aswell..


Comments

No contest really, get the ATC's reconed then you know it's right

Try here:

<TABLE><T>
<T>
<TR>
<TD>Address:</TD>
<TD>
<DIV ="adr">ChapelLane, HighWycombe, Buckinghamshire, HP124BJ, UK</TD></TR>
<TR>
<TD>Telephone: </TD>
<TD>
<DIV ="tel">work(01494) 524211</TD></TR>
<TR>
<TD>Fax: </TD>
<TD>
<DIV ="tel">fax(01494) 474886</TD></TR>
<TR>
<TD>Web:</TD>
<TD> www.kurtmueller.com </TD></TR></T></T></TABLE>Edited by: colint

Mueller cones are brilliant - If I'm right, P Audio use them on the SD series, Void uses them and all of the italian manufacturers do. Brilliant things. Withstand loads of abuse.

last pair i got Reconed was around £140 the Pair, proper ATC kits, but took them 4 weeks to make them up. I do like the ATCs in the ladys.

Colin, just Put another 3 coats on the Ladys, upto about 5 now. Reckon one more, then a good week in my mates toasty unit to set.

Got four working ATC's I can swap,for your fourRCF's
If your getting some ATC recone kitslet me know and i'll put an order in with you!

ATC recone kits take a while cos they build them to order. You could try contacting the factory directly.

www.atc.gb.net/contact.htm