I need a suggestion

More
9 years 9 months ago - 9 years 8 months ago #21844 by csiky
I need a suggestion was created by csiky
I need help too finish my box and i need suggestion how to proceed! i have this speaker plan, i need advice how to continue! thank you for helping mee friends! ( sorry for my bad English :blush: )
Last edit: 9 years 8 months ago by csiky.

Please Log in or Create an account to join the conversation.

More
9 years 9 months ago #21845 by bgrade
Replied by bgrade on topic I need a suggestion
If you are looking at a plan and about to start construction, I would suggest figuring out your cut list on sheets of ply first to waste as little wood as possible and get to cutting. Make sure you understand how each joint will function and how you will deal with handles and terminals. Use good wood.
The following user(s) said Thank You: csiky

Please Log in or Create an account to join the conversation.

More
9 years 8 months ago #21846 by mini-mad
Replied by mini-mad on topic I need a suggestion
...and get some bracing on the back and sides.....

and do the baffle cutout & T-nuts BEFORE you put it together!
The following user(s) said Thank You: csiky

Please Log in or Create an account to join the conversation.

More
9 years 8 months ago - 9 years 8 months ago #21884 by bjm362
Replied by bjm362 on topic I need a suggestion
Circular cuts using a router should be cur prior to installation. Circular cuts using a jig saw are frequently easier after panel is installed depending on location and clearances. Try to avoid locating cuts and braces where they interfere with each other.
Last edit: 9 years 8 months ago by bjm362. Reason: forgot something!

Please Log in or Create an account to join the conversation.

Time to create page: 0.248 seconds
Powered by Kunena Forum