- Posts: 9
- Thank you received: 0
80 litre box ,pd 154, port length ?
- bigga barse
- Topic Author
- Offline
- New Member
Less
More
12 years 1 month ago #19105
by bigga barse
80 litre box ,pd 154, port length ? was created by bigga barse
i am in the process of building compact reflex kick / bass box, it is 80 litres and the driver i am using is a pd 154, what length and width should the single tube port be in order to get a solid kick within the following frequencys 80hz to 250hz or does it need any length at all ? or how efficient would it be if it was a sealed box ? any advice would help not familiar with winisd etc so let me know thanks
Please Log in or Create an account to join the conversation.
- chrapladm
- Offline
- New Member
Less
More
- Posts: 17
- Thank you received: 1
11 years 7 months ago #19864
by chrapladm
Replied by chrapladm on topic Re: 80 litre box ,pd 154, port length ?
What speaker is this?
80-250hz is not much of bass but more like midbass. Most of the kick drum is 60hz and octaves below and higher. But if you want a port that will work in 80liters then give me a sec and I will tell you the port length.
80-250hz is not much of bass but more like midbass. Most of the kick drum is 60hz and octaves below and higher. But if you want a port that will work in 80liters then give me a sec and I will tell you the port length.
Please Log in or Create an account to join the conversation.
- rastafarlig
- Offline
- New Member
Less
More
- Posts: 14
- Thank you received: 0
11 years 4 months ago #20321
by rastafarlig
Replied by rastafarlig on topic Re: 80 litre box ,pd 154, port length ?
Hey!
I'm in the same boat.
But I would like to go as low as 40-50hz..
See my other topic I just started this night.
CLICK HERE
Hope that you will help me out,
Rasmus
I'm in the same boat.
But I would like to go as low as 40-50hz..
See my other topic I just started this night.
CLICK HERE
Hope that you will help me out,
Rasmus
Please Log in or Create an account to join the conversation.
Time to create page: 0.466 seconds