file Modifing the hog

8 years 7 months ago #12380 by fireman1
Modifing the hog was created by fireman1
Hey I´ve tried loggin´ in for a while now had to change names don´t know why,
anyways was thinking of making the hog 1220Hx600Wx950 , the horn gets longer , should
also drop lower No ? I know it´l be abit heavier,

:?: smiley38

Francis

Please Log in or Create an account to join the conversation.

8 years 7 months ago #12386 by tony.a.s.s.
Replied by tony.a.s.s. on topic Modifing the hog
I usually don't comment on other cabs, but in principal, a longer horn will be better than a short one and the small increase in the length won't affect the horn loading/compression chamber ratio so that it is noticeable.

Peace and goodwill to all speaker builders

Please Log in or Create an account to join the conversation.

8 years 7 months ago #12390 by fireman1
Replied by fireman1 on topic Modifing the hog
cheers T
it´s just when using them standing up they are abit low 1220 plus about 600 kicks ontop gives a good height for the tops if one uses
something like the MT121

Please Log in or Create an account to join the conversation.

8 years 7 months ago #12395 by nickyburnell
Replied by nickyburnell on topic Modifing the hog

Tony.A.S.S. wrote: I usually don't comment on other cabs, but in principal, a longer horn will be better than a short one and the small increase in the length won't affect the horn loading/compression chamber ratio so that it is noticeable.

Staip would always welcome comments Tony. Seems like a good idea.
How's the injury BTW?

Please Log in or Create an account to join the conversation.

8 years 7 months ago #12405 by tony.a.s.s.
Replied by tony.a.s.s. on topic Modifing the hog
It's not bad now, Having done my back in the week before. I was getting over that and I woke up and couldn't move my head with immense pain so driving and lifting were once again put on hold. I never give up, and today I was back in the factory throwing things around ( pretending it didn't hurt.)

Peace and goodwill to all speaker builders

Please Log in or Create an account to join the conversation.

8 years 7 months ago #12417 by luton_soundman
Replied by luton_soundman on topic Modifing the hog
someone we all know is in the process of moddifying the hog...not sure on the exact mods right now but should be interesting smiley2

Please Log in or Create an account to join the conversation.

Powered by Kunena Forum