EMINENCE DELTA 12A PROBLEM

  • luton_soundman
  • Topic Author
  • Offline
  • Elite Member
  • Elite Member
More
13 years 7 months ago #13318 by luton_soundman
EMINENCE DELTA 12A PROBLEM was created by luton_soundman
having a problem with one of our drivers....a couple months back we did a sound check and plugged in the eminence 12 and had sound straight away, no problems. 30seconds later it cut off completly, no sound what so ever smiley5 the box was standstill, no cables were toyd with, wasn't the amp or cable. Today we opened up the cab and connected the speaker direct to the amp and still got no sound? what could be wrong with the driver and how would i get it fixed? amp was playing low, clean signal no chance of it blowing the driver. what could it be?

cheers

Please Log in or Create an account to join the conversation.

More
13 years 7 months ago #13319 by MAutopsy
Replied by MAutopsy on topic EMINENCE DELTA 12A PROBLEM
Lead wires good? Corrosion or moisture in the gap?

Please Log in or Create an account to join the conversation.

  • luton_soundman
  • Topic Author
  • Offline
  • Elite Member
  • Elite Member
More
13 years 7 months ago #13320 by luton_soundman
Replied by luton_soundman on topic EMINENCE DELTA 12A PROBLEM
speaker wire is fine, tested it on another speaker and all is well. definatly the driver. but what i do not know? cant see how it could of blown though. when it cut out all the other speakers were still playing fine. everything in the setup has been tested and is all working.

Please Log in or Create an account to join the conversation.

More
13 years 7 months ago #13333 by MAutopsy
Replied by MAutopsy on topic EMINENCE DELTA 12A PROBLEM
I meant the wires from the voice coil to the connectors on the driver.

Please Log in or Create an account to join the conversation.

More
13 years 6 months ago #13364 by nrpinc
Replied by nrpinc on topic EMINENCE DELTA 12A PROBLEM
Press down evenly on the cone, not to hard, and if there is a crunching sound or no movement then its the voicecoil.

Please Log in or Create an account to join the conversation.

Time to create page: 0.523 seconds
Powered by Kunena Forum