tse118

hi

i have 2 unloaded copies of turbosound tse118...they also need some repair but look solid

i'd liek to know a suitable driver to set the best out of them...

i think to put them on top of scoops playing 60-70/140hz
for live work as 1 way bass bins....

thanks and have a good time!!!

this

cgi.ebay.co.uk/Turbosound-Turbo-Sound-Dr...657018QQcmdZViewItem

or this

cgi.ebay.co.uk/TurboSound-LS-1801-18-dri...ksid=p3286.m20.l1116

both designed 4 tse118/218, the 1802 went on to superseed the original 1801 in the same cabs

thanks
but i'd like to go with som,ething i can get in italy, or elsewhere, but new....a precision device, fane, eminence, b&c, rcf, beyma.....
the italian distributor of turbo is in my town but they cant help me

There are speakers that would suit, but with all the TMS and TSE series speakers, you have to make sure that you can get the speaker to fit. It's the depth of any reasonable bass speaker that could be a problem. If a B and C 18PZB100 would fit, that would be worth a shot.

Tony.A.S.S. wrote: There are speakers that would suit, but with all the TMS and TSE series speakers, you have to make sure that you can get the speaker to fit. It's the depth of any reasonable bass speaker that could be a problem. If a B and C 18PZB100 would fit, that would be worth a shot.

thanks

it can be easy for me to get b&c in italy, so 18pzb100 can be ok, if it fits. i can sort it out.
i also have 2 spare sonora 18" speakers p8390, but i dont think it will work good.

the guy who sold me the boxes said that i can reverse the speaker placement, so the box is bandpass, something like es18, i will lose a lot of mids and some db on the bass too...

uhmmm are you sure? If you encrease rear chamber's volume you get some db on the low frequency if you decrease throat chamber's volume you get some db near the mid.
correct me if I'm wrong, I'm learning.

Old trick turn the trap door the other way round lets you fit in taller drivers

Tony.A.S.S. wrote: There are speakers that would suit, but with all the TMS and TSE series speakers, you have to make sure that you can get the speaker to fit. It's the depth of any reasonable bass speaker that could be a problem. If a B and C 18PZB100 would fit, that would be worth a shot.

b&c 18pzb100 has a dept of 202mm...
it would fit i think...from my measurements the tse should be some cm more

anyone tried it in a folded horn?

i can get a fair price for this one
same depth as b&c pzb100
www.faitalpro.com/products/schede/hps.php?id=201070110

Tony.A.S.S. wrote: There are speakers that would suit, but with all the TMS and TSE series speakers, you have to make sure that you can get the speaker to fit. It's the depth of any reasonable bass speaker that could be a problem. If a B and C 18PZB100 would fit, that would be worth a shot.

i tried 2 bass drivers

ciare 454 it fits but sound not very good

then i put my sica p8390 woofer (a reflex driver) and it didnt fit. so i mounted it reverse, and it worked ok, not very powerful, but much better than a 15" reflex, i tried them side by side, in singles...18" its louder...
i would say by reverse mounting the driver it became similar to es 18 bph...
wrong?