file hog scoop

8 years 10 months ago #16156 by POISONCLAN1
hog scoop was created by POISONCLAN1
am trying to build a hog scoop was wondering, i made the conversion from millimeter to inches but round it off to a whole number for instance 950mm i put it as 37inches instead of 37.4015748 would that be a problem or am i doing it the right way ....your help will be greatly appreciated

Please Log in or Create an account to join the conversation.

8 years 10 months ago #16159 by bee
Replied by bee on topic hog scoop
your best bet would be to draw the cab to scale on some graph paper, you may need to stick a few sheets together, that way you will get all the bits to fit, your best bet would be to build to the exact measurements, do you have a tape measure in mm........

Please Log in or Create an account to join the conversation.

8 years 10 months ago #16161 by POISONCLAN1
Replied by POISONCLAN1 on topic hog scoop
thanks for the quick reply ...guess i will have to find a tape measure in millimeters cause i don't have one

Please Log in or Create an account to join the conversation.

8 years 10 months ago #16162 by bee
Replied by bee on topic hog scoop
lol where are u based in the world.....

Please Log in or Create an account to join the conversation.

8 years 10 months ago #16164 by crossed
Replied by crossed on topic hog scoop
I'm in the US and went to lowes to find a tape metric measure. There is a 10'x15' wall of nothing but tape measures and after 20 minutes I finally found the ONE.

Please Log in or Create an account to join the conversation.

8 years 10 months ago #16166 by bee
Replied by bee on topic hog scoop
smiley32 smiley36

classic.... so whats stopping you, time to get cutting.....

Please Log in or Create an account to join the conversation.

8 years 10 months ago #16172 by swan
Replied by swan on topic hog scoop
37.4 inches will put you way out as the 0.4 inches revert to about 6mm and can cause a lot of frustration and headaches. Glad you found the metric tape. Get yourself a steel ruller that is metric as well if you can find one.

Please Log in or Create an account to join the conversation.

Powered by Kunena Forum