- Posts: 73
- Thank you received: 0
20mm 20ppi foam
- markie
- Topic Author
- Offline
- Senior Member
Less
More
16 years 6 months ago #1412
by markie
20mm 20ppi foam was created by markie
I recentlysent some acoustic foamto a customer in Norway. It got lost and so I cut some more but before I had chance to send it the 1st lot turned up....... SO, I have 8 pieces which are going begging. I believe they were intended for Turbosound somethingoruther.
Its 20ppi foam and 20mm thick and they measure approx 670mm x 390mm. I'd normally charge about £7.00 a piece.
Dave's had 2 pieces so theres now 6 for £20.00 inc post.Edited by: markie
Its 20ppi foam and 20mm thick and they measure approx 670mm x 390mm. I'd normally charge about £7.00 a piece.
Dave's had 2 pieces so theres now 6 for £20.00 inc post.Edited by: markie
Please Log in or Create an account to join the conversation.
- calsystems
- Offline
- Elite Member
16 years 6 months ago #1414
by calsystems
Replied by calsystems on topic 20mm 20ppi foam
Would you sell 2? as they are almost the right size that i need.
Please Log in or Create an account to join the conversation.
- markie
- Topic Author
- Offline
- Senior Member
Less
More
- Posts: 73
- Thank you received: 0
16 years 6 months ago #1416
by markie
Replied by markie on topic 20mm 20ppi foam
2 for £8.00 inc post?
By the way if you need to trim it the best way is with a straight edge and one of those craft knives with sectional break off blades.Edited by: markie
By the way if you need to trim it the best way is with a straight edge and one of those craft knives with sectional break off blades.Edited by: markie
Please Log in or Create an account to join the conversation.
- chaudio
- Offline
- Platinum Member
16 years 6 months ago #1417
by chaudio
Replied by chaudio on topic 20mm 20ppi foam
I've found if you regularly need to cut the same size for particular cabs, the best way I've found to keep it square is to cut a piece of wood the same size, only needs to be thin ply. Put the foam on the ground then kneel on the wood while you cut round with a sharp knife.
Please Log in or Create an account to join the conversation.
Time to create page: 1.535 seconds