USB

these plans are not overly clear and for some reason it wont let me blow them up was just wondering if anyone has a pdf or cutlist for these please and thanks

greetings Forum. Does anyone have a modded plan for building this bin with a curved front? like around six panels on each curve instead of the 2 pieces in the original plan? also any advice on how to do it would be greatly appreciated.

best regards,

Hello everyone, new to builidn and that, just been looking for some 18mm marine ply and came across this at a brilliant price! Will it work!? www.builderdepot.co.uk/18mm-x-1220mm-x-2...-marine-plywood.html

Thanks, Kieran

Will Void V18-1000's fit in this cab?
If not, does anybody know of a similar style cab that will take them?
Thanks.

positive on speakon to negative on driver, the usb needs to be wired in reverse.....

can anyone send me a cut list for 2 usb?? would be a great help

Hi,

Does any one no the best way to wire the USB? Sure i see details on the forum before but can not find them anymore

Any help appreciated

Wayne

can some one help me find 4 flat packs of the usb bins to buy

hello, sir i really love your design, and i think it would be a perfect addition to my existing system. so is it possible to get some nice planes for rebuilding it? thank you very much in advance ! kind regards alex

can I make one half of it? Will it still possess all of its sound quality except for the halved reduced spl and bottom end response?

Afternoon all,

My father and i have decided to try and attempt to build a couple of USB speakers as a little project over the next few weeks. Ive downloaded the plans and redrawn them in AutoCAD (i was bored. lol) to work out the remaining dimensions and angles ect.

No doubt ill have a few question for the members here in relation to this build over the next few weeks, but my first few are:-

1) What is the best way to wire USB's if they were to be used with their intended Labsub speakers, is using NL4MP. (could some explains the wiring to me in basic laymans terms lol)

2) I have redrawn the USB's with bar handles in the access panel, would this be ok? the bar handles are the self contained type, and i would be gluing and screwing them in to place so as to completely seal them?

3) Does anybody still make router templates for these ? any prices knocking about ?

Regards
Chris

what was your high pass set too......

can i ask for some help. we built a couple and when we tested it. it blew the drivers

its on the link directly above your last post.....

Hi can some 1 send me the plan for the usb i would like to bilud 2

www.freespeakerplans.com/images/ ... bplans.jpg

I would like to hear if somebody have the plan for this USB sub, because the link don't workThanks

yes just make them in half, minus off 9mm then add 18mm for the new end panel.... from the plan......

is possible to build a single speaker cab?

Try Tom at Stable Audio

Can you still get the flat packs?

jess you only have to say please........ use some manners, or you wont get any help at all...... smiley33

the motherfucking file doesnt start downloading will someone fix the fucking link?

1850 wont fit

Can this plan be scaled to suite 15" woofers?