Hog Scoop

Frequency: 35 to 200Hz

Enclosure Type: Scoop

Size: 986x636x950mm

Recommended Drivers: PD1850, v18-1000, v18-1200, 18tbx100, 18LW1400 or SD18

hog_scoop

hog_scoop_-_parts

Designer: Stipe Ercegovic (This email address is being protected from spambots. You need JavaScript enabled to view it.

Posts in discussion: Hog Scoop

Exuro replied the topic: #24309 1 year 9 months ago

Nevermind, got everything sorted now!

Here are my SketchUp plans including a cut list (first few braces I put down could be rearranged though).

drive.google.com/open?id=1cSJFzQLHK272Na5C7LbKHh95Wtari9JI

Hope this helps guys!

Exuro replied the topic: #24308 1 year 9 months ago

Hey guys,

Tried to piece these together but somethings going wrong and none of the braces fit in. If i=I use the angles provided it doesn't match the measurements in the first images.

Any help would be appreciated

have 5 days off coming up so was hoping to build then!

unclejam replied the topic: #24218 2 years 3 months ago

Hey Gents, I'm stuck between the P audio SD18 and the B&C 18TBX100, same price, which will be sonically superior? Powered by SAE PCM20 with 4 boxes per amp.

jngggggggg replied the topic: #23930 3 years 1 month ago

can anyone confirm if hogs when loaded w/ the ideal sub driver will produce bass below 30hz w authority?

SWCNC replied the topic: #23424 4 years 1 week ago

Hi Guys.

Anyone had any issues with the hog plan?. I have drafted it into cad but the layout dimensions dont seem to correspond to the panel dims for panel A. Or im missing something here.

Any idea where ive messed up or is there a known error in the plan. Cheers

Edit:

Manipulating the sketch to correct the 6mm difference and adding dimension 424 makes the 37 degree angle 37.28. Believe this to be the correct angle.

dominator8 replied the topic: #23323 4 years 3 months ago

Paweł Qu on Facebook - its me

DJoriginalseepo replied the topic: #23318 4 years 3 months ago

Josiah Seepersad on Facebook

DJoriginalseepo replied the topic: #23317 4 years 3 months ago

Hey man, you can use any driver in those cabinets, you just have to build them according to the specs of the speaker, like I did, mine is loaded with 21 inch subwoofers 4000watts RMS, so I have to build it way bigger than the original cabinet, so you can use any speaker you choose, you jus have to make changes in the cabinet to suit the speaker, higher wattage speaker need more space, and I still have to rebuild, I only build them 2 years now and the speakers mashing them up, literally, mashing up those cabinets, I have to build them deeper , it's 3ft deep, 3ft tall 2.5ft wide, have to make it 4ft deep, 4ft tall and 3ft wide,

hit me up on Facebook to see videos of them perform

DJoriginalseepo replied the topic: #23316 4 years 3 months ago

I made 2 of those hog scoops, after hearing them play, I'm going to build more, I got them loaded with MTE 21" inch 4000watts speakers can go as low as 25hz, I'm going to make more, looking to load them on a truck in the future, those are the best bass cabinets I ever heard

sn95 replied the topic: #23270 4 years 3 months ago

Looking at Ts of the driver doesn't appear to be the best for a scoop but if you are happy. The 4080 will work has the cheaper alternative to the other drivers listed

afterhourspro replied the topic: #23269 4 years 3 months ago

So, I've built my first 2 Hogs, and most of the recommended drivers aren't available in Australia.

I've loaded the 2 cabs with some FS Audio 18" drivers I had sitting in some ported boxes;
www.vfmaudio.com.au/15372/FS-Audio-18-In...ker-8-Ohm-2000-Watt/

I'm currently happy with the FS Drivers, however as always, want more. So was thinking of a Celestion Speaker;
celestion.com/product/88/ftr184080fd/

Thoughts?

dominator8 replied the topic: #23113 4 years 6 months ago

Thx. Enclosure with driver weigh almost 100 kilos

Four men carry a hog scoop on the 3rd floor.

sn95 replied the topic: #23112 4 years 6 months ago

Nice work

dominator8 replied the topic: #23110 4 years 6 months ago

Hi. Some pics of my HOG SCOOP (B&C 18PS76). I used them in my leaving room (25m2). Bas is avesome

Best regards from Poland!
Below stiper project with many dimensions in ACAD.

File Attachment:

File Name: hog_18mm_color_1.pdf
File Size:81 COM_KUNENA_USER_ATTACHMENT_FILE_WEIGHT

File Attachment:

File Name: hog_18mm_color_2.pdf
File Size:85 COM_KUNENA_USER_ATTACHMENT_FILE_WEIGHT

File Attachment:

File Name: Piersciend...kowy.pdf
File Size:59 COM_KUNENA_USER_ATTACHMENT_FILE_WEIGHT

DJGRV replied the topic: #23083 4 years 6 months ago

how to make hog scoop perfacatally and completed

sn95 replied the topic: #22961 4 years 10 months ago

H29.5. D37. W25 but go to an online calculator .

Manhatter replied the topic: #22959 4 years 10 months ago

Do anyone know's the measurment's of the hog scoop in inches?

rk71186 replied the topic: #22928 4 years 10 months ago

any one adapted these to fit PD1851's if so can someone send me the plans

Fulleffect87 replied the topic: #22861 4 years 11 months ago

Anyone know if it's possible to load these with the driver flipped, magnet facing out?

Reality Sound replied the topic: #22305 5 years 7 months ago

Looks good dude. Are requests to build Hogs common?

bee replied the topic: #22304 5 years 7 months ago

bee replied the topic: #22303 5 years 7 months ago

bee replied the topic: #22302 5 years 7 months ago

bee replied the topic: #22301 5 years 7 months ago

mini-mad wrote:
gapedo wrote: cubo 18
No its not a kick cab... it wont work!
Es 18bph or the
Es 15bph..... or maybe a HD15. I believe the Es 18bph was designed for the hog.

the es18 was modded to fit above the hog perfect. search for electrical mod es18.....
or look on hear for the build pics of the first ones built....

The 1852 in a hog will hit the rear baffle and top of cab, I modded the first hogs for 52's for emperor stafari sound system, again build pics on this site.
People are calling the modded hogs for the 52, super hogs

The first 4 built were with the pre production models of the 52, and they were using them for a few months before the drivers were released.

mini-mad replied the topic: #22289 5 years 7 months ago

gapedo wrote: cubo 18

No its not a kick cab... it wont work!
Es 18bph or the
Es 15bph..... or maybe a HD15. I believe the Es 18bph was designed for the hog.