MHB-30

Frequency: around 50Hz to 200Hz

Enclosure Type: Hybrid

Size: 60x96x75cm

Recommended Driver: PD.12SB30, LF12G301 Spec Sheet or 12FH520 Datasheet

Plan: MHB-30

Designer: This email address is being protected from spambots. You need JavaScript enabled to view it.

Posts in discussion: MHB-30

Ilovetheworld replied the topic: #22534 8 years 4 months ago

What is better this speaker or the mhb-46

kentech replied the topic: #13838 12 years 1 hour ago

thanq very much Bee.

bee replied the topic: #13837 12 years 1 hour ago

i have not simmed this one yet, when i get around to it ill post for you........ I have a few other progects on the go at mo, bitzo on this forum also is very good with akabak, he may have the script, or plotts.

Fechete_Ionut replied the topic: #13832 12 years 8 hours ago

so, does anyone have the scripts for MHB in akabak ?

if u have and don;t want to share them.. please make a print screen of Group Delay, Phase Response, SPL Response 1m/1w and Cone Displacement at 1w for this woofer radian-tech.com/pdf/Radian%20L128402.pdf
Thanx a lot guys !

bee replied the topic: #13804 12 years 3 days ago

akabak is prob the best sim prog there is....... all sim software are close but not the same as real time plotts, akabak plotts hf freq's much better than horn resp, and there is no limitations to the types of cabs you can design........ the more advanced the script in akabak the more to real time plotts it gets........

guest replied the topic: #13801 12 years 3 days ago

akabak exaggerates things like hell

bitzo replied the topic: #13761 12 years 1 week ago

akabak

kentech replied the topic: #13756 12 years 1 week ago

ah... what software is used to sim this cab ?
nobody build this cab ? how does it sound ? Phase response, Group delay... this are important parameters of the cab...

bitzo replied the topic: #13752 12 years 1 week ago

kentech wrote: did anyone built this cab because nobody posted pics with this build....
have u got the data for HornResp for this bin ?
Thanx.

This cab is pretty simple to sim, but hr isn't very accurate for this type of cab because you can't set the port distance from ground.

kentech replied the topic: #13737 12 years 1 week ago

nobody anything ?

kentech replied the topic: #13665 12 years 1 week ago

did anyone built this cab because nobody posted pics with this build....
have u got the data for HornResp for this bin ?
Thanx.