file Cubo Kick 15

7 years 4 months ago #23637 by lp8124
Replied by lp8124 on topic Cubo Kick 15
Hello Cubo,

i really need a 18¨ 1000W RMS version of the KICK to keep up with the 18¨ 1600W RMS Extra extended Subs.

is there any hope?¿

Please Log in or Create an account to join the conversation.

7 years 4 months ago #23639 by Cubo15
Replied by Cubo15 on topic Cubo Kick 15
You need, or you think you need? A few pages back in this thread there's "jo bg" using Cubo Kick 15 with 2 kW sub bins, with ease. But sure why not, I might even design a 21" kick one of these days. It would help, if you told me what drivers you're going to use (or if I can choose). Low Qts, low to medium Vas, neo drivers are easiest to implement.

Best regards

Cubo

Please Log in or Create an account to join the conversation.

7 years 4 months ago #23640 by lp8124
Replied by lp8124 on topic Cubo Kick 15
these for the subs: www.beyma.com/products/lowmidfrequency/118SW16ND8 :evil: :evil:
any other beyma neodynium 18"series for the kickbins :P
www.beyma.com/products/lowmidfrequency

cheers B)

Please Log in or Create an account to join the conversation.

7 years 3 months ago #23646 by mikelink
Replied by mikelink on topic Cubo Kick 15
what about a trap version of cubo kick 12?

Please Log in or Create an account to join the conversation.

7 years 3 months ago - 7 years 3 months ago #23650 by Cubo15
Replied by Cubo15 on topic Cubo Kick 15
@Ip8124: I'm planning on increasing the depth to 65 cm. If you're satisfied with a finished Sketch-up model (and work the rest out yourself) you could have the model before the end of the year.

@Mikelink: I'll be working at a Sketchup model of the trap version of Cubo Kick 15 and Cubo Kick 18, for the coming month. After that I should have room for developing Cubo Kick 12, remind me by then if you're still interested.

Best regards

Cubo

Please Log in or Create an account to join the conversation.

7 years 3 months ago #23661 by mikelink
Replied by mikelink on topic Cubo Kick 15
hi again cubo, can you send me plans for cubo kick 12 and 15 please? some friends of mine wants to build a new sound system and i think that 4x cubo sub\ 2x bi-cubo sub with 2x cubo kick \ 1x bicubo kick with 2 mt121 will work good, my email is This email address is being protected from spambots. You need JavaScript enabled to view it.

Please Log in or Create an account to join the conversation.

7 years 3 months ago #23668 by Cubo15
Replied by Cubo15 on topic Cubo Kick 15
Hi Mike, I did send the plans (equal to the ones) found at the beginning of this thread.

Best regards

Cubo

Please Log in or Create an account to join the conversation.

7 years 2 months ago #23696 by t.geessounds
Replied by t.geessounds on topic Cubo Kick 15
playing around with sketchUp
Attachments:

Please Log in or Create an account to join the conversation.

7 years 2 months ago #23712 by Cubo15
Replied by Cubo15 on topic Cubo Kick 15
Wow, that is ...very red and huge.. Have you thought about placing the compression driver (partially) in the Cubo Kick horn mouth, below the mid?

Also, what do you use for rendering the picture?

Best regards

Cubo

Please Log in or Create an account to join the conversation.

7 years 2 months ago #23725 by tc87
Replied by tc87 on topic Cubo Kick 15
Are there any sketchup files available for this build?

Please Log in or Create an account to join the conversation.

Powered by Kunena Forum