Cubo Kick 15

Not that I'm aware of. However, if you would be to create one, I bet you could do it in under 10 - 15 minutes

Best regards

Cubo

Hi Cubo,

Do you think the B&C 15PLB76 will work on this cubo 15 kick design (got 6 here waiting for a good home) ?
Here is the link with driver parameter : www.bcspeakers.com/products/lf-driver/15-0/8/15plb76

Thanks for your shared designs and knowledge.

I haven't simulated the B&C but from it's specs it looks like a real good match. Give me a day or three and I will look at what the sims tell me.

Best regards Cubo

Hi Cubo,

Have you got any feedback about combining cubo kicks 15 with scoops or hog scoops? Also, do you recommend any model of cabinet for mid and high freqs that makes a good match with cubo kick 15s?

Thanks a lot for your work!

I haven't simulated the B&C but from it's specs it looks like a real good match

The simulation agrees, it´s a beauty of a driver for Cubo Kick 15

Have you got any feedback about combining Cubo kicks 15 with scoops or hog scoops?

Definitely seen some combinations of Cubo Kicks with scoops, even somewhere on this forum I think. Member jo bg combines the kicks with the mt121 (see somewhere in this topic), also seen a combo with the mt-130 and of course reflex.

Edit - Plus let's not forget the SMT-212.

Best regards Cubo

Hi guys!

I am interested in building a Cubo kick 15.
I have a Celestion FTR15-4080F, normally specifications looks good for the Cubo kick 15 nope?

Driver spécification : celestion.com/product/92/ftr154080f/

best regards!

Lovely specs for Cubo Kick 15 and pretty close to the 15ND930 but with a 4" VC, so that's always good (you could even use them in Cubo 15 Extended/ Extra Extended).

Best regards Cubo

Thank you very much, I'm looking for kick, so, I think, I'll start manufacturing Cubo Kick 15.
I'm not good enough to make 3D plan on sketchup. However, I will try to take some pictures during the production.

Bests regards!

ok i give this guy the link to the cubo 15 kicks cause i knew it will work for him needs ..he took the plans an got someone to build them for him.. he will load then with the 18sound 15mb700 .. but the builder said the spk will not fit so he went to the center of the baffle board it look like... lol i build 4 of them in it fit and i follow the plans.. anyway this is what he got.. Sir cubo what do u think..

First cabinet Ive ever built! One more kick to build then a couple of Cubo 15s, started on the more difficult as I already have a set of bins to use below the kicks and up against it time wise.
These are currently dry assembled as its a lot to get my head around next up is test loading the driver, handle placement and speakons on the back, dry build the other and then glue and finish off