Free Speaker Plans

Frequency: 42Hz to around 150Hzalt

Efficiency: 1box 1w1m 2Pi (2.83volts) = 102db,4 boxes 1w/1m 2Pi (1.41volts) = 106.5dB

Enclosure Type: Ported Horn hybrid

Size: 53x75x58cm 

Driver: check the forum discussion to find out which drivers are suitable for this design

Response:

alt

Plan: icon MBP-46 (118.84 kB)

alt

Designer: This email address is being protected from spambots. You need JavaScript enabled to view it.

 

 

 


Posted: 7 months 3 weeks ago by deejay skillz #20506
deejay skillz's Avatar
Mr Thawach, would 15 inch kapparo LF be suitable for this cab?...how does it compare to cubo 15? thank you
Posted: 8 months 2 weeks ago by t.geessounds #20379
t.geessounds's Avatar
any of u guy ever think about using the 15MBP-46 over scoop as a kick bin??
Posted: 8 months 3 weeks ago by bgrade #20356
bgrade's Avatar
It is usually to reduce standing waves. That is when the cab dimensions lend to a rather hideous resonance of wavelengths matching the distance between panels. It is also sometimes used when the box size is smaller than ideal for a speaker, as the ploy fill stuff can slow down a wavelength, and sort of simulates a bigger box.
Posted: 8 months 3 weeks ago by boomin #20347
boomin's Avatar
i have a probable stupid question,what is the purpose of insulation in some cabs
Posted: 11 months 1 day ago by Mikkel Nielsen #20028
Mikkel Nielsen's Avatar
Thank you thawach

I will look at different designs then.
Posted: 11 months 1 week ago by Thawach #19970
Thawach's Avatar
hi Mikkel ur drv is not suitable for the 15" cab. the drv is suitable for sealed cab
Posted: 11 months 2 weeks ago by Mikkel Nielsen #19953
Mikkel Nielsen's Avatar
Hello peeps

I've got a few questions.

Are there any plans for a 15" version of this cab?
If so would the Eminence delta 15LF (www.bluearan.co.uk/index.php?id=EMIDEL15...wsemode=manufacturer) work in this cab, would be using them as stand alone bass until i can get some dedicated subs to take over the low freq.

Also im new to all this so im not the most confident of builders so is there anyone here I could ask a few questions on the assembly of the cab/ reading the plans etc, it would be greatly appreciated!

Many thanks

Mikkel
Posted: 1 year 3 days ago by Thawach #19849
Thawach's Avatar
jrock7 wrote:
hello, i am interested to make one of these cab (MBP 46) for a 18 inch woofer. However on the plans section is that plan for a 15 or 18 woofer or is it just the same for both drivers?. If there is a separate plan for the 18" woofer can someone post the plan for it. Thanks you.

the plans are difference between 15" n 18" is not the same plan
Posted: 1 year 3 days ago by Thawach #19848
Thawach's Avatar
kreptonite wrote:
i would like to build the MBP-46 speaker. What drivers would you suggest. Please help me out, I would like an affordable options which doesn't compromise the quality?

the parameter of drv about fs=40-50 qts=0.3-0.8 vas=140-200 litre will work fine with this cab. please u looking for i can sim for u agian. :)
Posted: 1 year 1 week ago by jrock7 #19818
jrock7's Avatar
hello, i am interested to make one of these cab (MBP 46) for a 18 inch woofer. However on the plans section is that plan for a 15 or 18 woofer or is it just the same for both drivers?. If there is a separate plan for the 18" woofer can someone post the plan for it. Thanks you.
Posted: 1 year 2 months ago by kreptonite #19577
kreptonite's Avatar
i would like to build the MBP-46 speaker. What drivers would you suggest. Please help me out, I would like an affordable options which doesn't compromise the quality?
Posted: 2 years 5 days ago by Thawach #17174
Thawach's Avatar
t.geessounds wrote:
thanks what kick bin would u recomend for these driver???have them already

t.geessounds think that the tapped is suitable for ur drivers more than kick bin.
Posted: 2 years 6 days ago by t.geessounds #17071
t.geessounds's Avatar
thanks what kick bin would u recomend for these driver???have them already
Posted: 2 years 1 week ago by Thawach #17047
Thawach's Avatar
t.geessounds isnt good for ur drv. smiley19
Posted: 2 years 1 week ago by t.geessounds #17016
t.geessounds's Avatar
would the B&C15 tbx100 work well in the 15 version???
Posted: 2 years 1 week ago by Thawach #16992
Thawach's Avatar
about 18mbp46 think that someone worry that der magnet hits the panel. i adjust the back panel a little. u can see the pic. and i sim the graph respond with der same drvs. enjoy when build gays. smiley2
Posted: 2 years 1 week ago by Thawach #16991
Thawach's Avatar
joeysub wrote:
cubo and the mbp-46 are different animals!

the cubo is a sub and sounds good below 100hz and has good efficiency at those frequencies!

where as the mbp-46 is an allround bass cab and plays comfortably upto 150hz, it can play down to the low 40s but has high efficiency in the kick region (70hz-150hz).

hard the compare them as they're most efficient in different regions of the hz scale!


thanks joe helps to explain,yes the sound are very different. cant compare them. many people in thailand built der cubo und mbp46 but more than 50 from 100 built the 15 mbp46 after i posted on thai forum. cubo is best the same, a friend only played 2 boxes in party(because after finish 2). he said very happy with the soft sound. friends i sim der 15mbp46 and compare 2 drvs . please see the graph below. smiley4
Posted: 2 years 1 week ago by joeysub #16989
joeysub's Avatar
cubo and the mbp-46 are different animals!

the cubo is a sub and sounds good below 100hz and has good efficiency at those frequencies!

where as the mbp-46 is an allround bass cab and plays comfortably upto 150hz, it can play down to the low 40s but has high efficiency in the kick region (70hz-150hz).

hard the compare them as they're most efficient in different regions of the hz scale!
Posted: 2 years 1 week ago by t.geessounds #16983
t.geessounds's Avatar
i like the look of this box i would wanna try a pair but never hair them before how would it compair to the cubo 15 in the same frequence range?
Posted: 2 years 1 week ago by Thawach #16980
Thawach's Avatar
hi all gays the thread seems no has any update as a long time. today ill update the new pics, the pics show that try to show the boxes and sell them.all guys 2 boxes about 3 dollars is a good price? :idea:
Posted: 2 years 1 month ago by Thawach #16817
Thawach's Avatar
swan wrote:
I am very jealous of your rig. Looks very awsome. Well done smiley20

spent money for the carpenter. he never do the furniture , he only build the house. but seem he works well. smiley1
Posted: 2 years 1 month ago by Thawach #16815
Thawach's Avatar
joeysub wrote:
smiley20

those 15mbp46 are nice looking little cabs!

yes its a little box. when compare with 18" with another boxs. its very loud like 18 box. i have the pic when 18 mbp46 compare the size with tha f horn. and have the 15" tha f horn video record @ 50m, the only one pair. smiley1

http://www.youtube.com/watch?v=nlDRPUxQN6w
Posted: 2 years 1 month ago by joeysub #16791
joeysub's Avatar
Thawach wrote:
this video when mbp46 played job. 4 bins in a stack per side. the music from pc com. i don't sure my friend brought the dancer from there? LOL they look funny.

http://www.youtube.com/watch?v=k1Kk5T2lV_g




uummm , that women in the red top and hotpants is a cheeky little thing aswell smiley14
Posted: 2 years 1 month ago by swan #16790
swan's Avatar
I am very jealous of your rig. Looks very awsome. Well done smiley20
Posted: 2 years 1 month ago by joeysub #16789
joeysub's Avatar
smiley20

those 15mbp46 are nice looking little cabs!